A conventional ceramic tip was arranged with a certain gap between tips in a steel pipe so that the pipe was damaged at the gap before the tip was worn out.

Abrasion resistant pipe applied in coal-fired power plant ash and slag discharge tube, powder, powder tube, desulfurization pipeline
A conventional ceramic tip was arranged with a certain gap between tips in a steel pipe so that the pipe was damaged at the gap before the tip was worn out.
Fuel Inlet Elbow is used in many industries and is prone to breakage.
Abrasion Resistant Linings have been developed and optimized for maximum wear resistance and corrosion resistance.
With self-locking shape ceramic tiles installed into the bend or pipe by inorganic adhesive and as well as stud welding. This solution can prevent the tiles from high abrasion as well as falling off in high temperature under 750℃.
High alumina ceramic weldable tile with hole provide excellent abrasion and impact resistance for industrial friction equipment because weldable tile first stick on the surface equipment by epoxy resin then welded on the steel surface.
alumina ceramic tubes have a purity rate of 99.5 to 99.8 percent.
Alumina Ceramic Lining have very uniform coating of specially formulated ceramic material that is affixed to the inner of the pipe and gives a very smooth surface.
The ceramic chip composite pipe utilizes the principle of ceramic-metal composite production technology, and special corundum ceramics made of AL2O3 as raw material and rare metal oxide as solvent through high temperature sintering at 1730°C are bonded, welded, inlaid, and riveted.
Our Cement, steel power station wear&impact resistant alumina ceramic lining steel pipes are made of the most durable composites available today.
Alumina Ceramic Tile is high wear resistance, acid and a lkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material