Erosion acid, abrasion resistant ceramic lined steel elbow

Abrasion resistant piping systems are widely used at coal-fired power plants for a variety of purposes, including the conveyance of coal ash slurry to nearby settling ponds, the transfer of limestone slurry to absorber spray towers for removal of sulfur dioxide (SO2) and hydrogen chloride (HCl) from flue gases and for transporting away the calcium sulfate by-product of the flue gas desulfurization process.

After Analyses and research, it was thought that the main facts which affect drilling pipe abrasion resistant ring failure were abrasive property of formations, selection of high-abrasive material, and wielding technique.

abrasion resistant ceramic lined steel elbow for Pneumatic Conveying

Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. SunnySteel’s ceramic lined pipes resists abrasion and avoids product attrition.It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.The compact design reduces cost of pipe support and installation. It is automatically self-purging with little pressure drop.

Ceramic Lined Elbows and Bends could be also applied in the parts of concrete pump owing to their advantages especially the low weight which helps to avoid the jam during the transport of concrete.

Features of abrasion resistant ceramic lined steel elbow:

Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance.
A high density, diamond like hardness,fine grain structure and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.Ceramic has uses similar to Cast Basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems .

Advantages Compared with Traditional Wear Resistant

Alloy Cast Iron, Alloy Cast Steel, General Clad Steel Pipe and Cast Stone Pipe:

1. Good wear-resistance, giving full play to wear-resistance of high chromium cast iron.
2. Withstanding high pressure: Bimetal cladding pipe and bend can be used for any pressure rating. Close bonding of outer and lining by adopting special process make cladding interlayer molten-joint to ensure reliable operation.
3. Good mechanical impact and thermal impact resistance property.
4. Convenient in connection for installation: Bimetal cladding pipe and bend can be cut and welded as you like.

发表评论

电子邮件地址不会被公开。 必填项已用*标注