Valve is a device that regulates, controls or directs the flow of a fluid by opening, closing, or partially obstructing fluid flow. Sound bit complicated?
Month: September 2018
What is a Gasket
In piping, a Gasket is sealing material placed between connecting flanges to create a static seal, which will maintain the leakage proof sealing in all operating conditions.
Latrolet Dimensions
Latrolet is type of self-reinforced branch fitting that is used for taking branch which is not at 90 degrees to run pipe.
Threadolet Dimensions
Threadolet is a type of self-reinforced branch fitting that is used whenever threaded branch connections are required from the pipe header.
Sockolet and Sockolet Dimensions
Sockolet is a type of self-reinforced branch fitting developed by Company called Bonney Forge.
Weldolet
Weldolet is type of self-reinforced branch fitting developed that is used whenever branch connections are required in size where reducing tees are not available and/or when the branch connections are of smaller size as compared to header size or when tee cannot be accommodated in the piping header, weldolets are used.
Olets – A Complete Guide
In this lecture, you will learn about olets, which is self-reinforced branch connection. There are two ways for branching from the run pipe. 1st is a pipe to pipe branching. Either with reinforcement pad or with the help of standard tee.…
Orifice Flange Dimensions
Orifice flange dimensions are covered in ASME B16.36. Orifice flanges are available from Class #300 to Class #2500. Class #300 flanges are available in threaded, slip-on and weld neck end types
Blind Flange Dimensions
Blind flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.
Slip on Flange Dimensions
Slip on flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.