Below are our available pipe fittings that will meet your project needs. We will help you put together your entire project and ship it to your closest port.
Abrasion resistant pipe and fittings
Abrasion resistant pipe applied in coal-fired power plant ash and slag discharge tube, powder, powder tube, desulfurization pipeline,in addition also widely used in the following industries:
- After Analyses and research, it was thought that the main facts which affect drilling pipe abrasion resistant ring failure were abrasive property of formations, selection of high-abrasive material, and wielding technique.
- Mining coal industry, coal, coal mines, washing filling, coal mine,
- Metal mine ore tailings transport, and wear-resistant elbow,
- Metallurgy furnace of steel, coal, iron pipe; such loss CAO, zinc Bei sand conveying pipeline steel, alloy , the secondary refining etc; the selection of wear-resisting elbow.
An abrasion Resistant pipe Bend has to meet certain requirements.
Key Specifications/Special Features of pipe fittings
ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.
Pipe Fittings are applied to connect two pipe ends together, to change direction or size of the pipes.
You can bend pipe and tubing in one of several methods, depending on what you plan to use the bent pipe or tube for.
ASTM A420/A420M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service.
We aware the beveling is very important processes in the whole production procession of butt-welding pipe fittings, we always make beveling according to the standard strictly.
Bends typically have a minimum bending radius of 1.5 times pipe radius (R).
ASME B16.28 Standard covers ratings, overall dimensions, testing, tolerances, and markings for wrought carbon and alloy steel…
There are issues with bends since the tickness at the bend radius reduces as we bend the pipe.