Vessel heads

We manufacture a wide range of vessel to works standards, both for construction purposes and as dished vessel in the form of , elliptical heads and caps for pressure applications.

Applications are very varied – ranging from candleholders to pipe end-pieces or pressure vessels in equipment construction. And if a central hole is needed for connections, this can also be provided.

Here you can see our range of :(hover for more information)

Vessels used to store liquids at low pressure are normally fitted with flat end sections. This is the cheapest way of enclosing the end of a vessel. For storage of fluids at higher pressures, the ends are normally domed to reduce mechanical stresses. A number of different domed head designs are used.

dished plates

Standards works standards
Measurements Ø 21.3-610.0mm, thickness 3.0-10.0mm
Materials S 235
Certifications 2.2

For pressures over 10 bar, ellipsoidal heads are often used. In cross-section, the head resembles an ellipse, its radius varying continuously. This results in a smooth transition between the dome and the cylindrical part of the vessel. Ellipsodial heads are deeper than comparable torispherical heads.

HEADS

heads

Standards DIN 10253-1
Measurements Ø 21.3-406.4mm, thickness 3.0-8.0mm
Materials S 235
Certifications 2.2

TORISPHERICAL HEADS

TORISPHERICAL HEADS

Standards DIN 28011
Measurements Ø 21.3-610.0mm, thickness 3.0-10.0mm
Materials S 235, P265GH, 16Mo3
Certifications 2.2 / 3.1 / 3.2

CAPS

heads

Standards EN 10253-2 (Typ A/B)
Measurements Ø 21.3-610.0mm, thickness 2.0-30.0mm
Materials S 235, P265G, 16Mo, 313CrMo4-5, 10CrMo9-10;
P355 N/NH/NL1/NL2 WPB; WP11; WP22
Certifications 3.1 / 3.2
  • Large size cap
    Large size caps manufactured using superior grade raw materials.