Pipe bending

The pipe bending is used to change the direction of run of pipe.
It advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design. usually,the bends consist of 3D,5D,7D even 12D series.

12D Pipe bending

The RADIUS of a 12D pipe bend is actually what is 5 times the nominal diameter. So if you had a 10″ diameter pipe, the radius of the centerline of the bend would be 50 inches.

180 Degree pipe bendingA H180 Degree pipe bending is a pipe bend that used in high pressure application.

5D Pipe bending

A is a pipe bend that the bend radius is 3 times the pipe outside diameter.

API 5L Pipe bend

API 5L PIPE BENDThe pipe bend be made accord to the API 5L standard. API 5L are most commonly specified for pipelines of large size (as 12″ and higher) and long (more than 300 ft) pipes for services offsite process plants.

Bending Services

Manufactuer of Pipe & Tubing, Hollow Structural, Flat Bar, Angles, Channel, Beams

Butt-welded pipe bending

is a pipe bend that the bend radius is 3 times the pipe outside diameter.

High pressure pipe bending

A is a pipe bend that used in high pressure application.

Large size pipe bending

It advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design.

Seamless pipe bending

Seamless pipe bending is a pipe bend that the bend radius is 3 times the pipe outside diameter.

Small size pipe bending

Materials: carbon steel, stainless steel A234, A403, F304, F304L, F316 and F316L

An effective tubing system has to meet certain requirements.

Ceramic tile lined bending

Key Specifications/Special Features of pipe bending, bend fittings

The pipe bending is used to change the direction of run of pipe. It advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design.
usually,the bends consist of 3D,5D,7D even 12D series.
We are engaged in supplying wide range of Bend Fittings.

Pattern
figure
Nominal size 1/2”-48” (DN15-DN1200)
Wall thickness 2~100mm
Angle Degree15,20,45,60,90,135,180
Type
3, 4, 5, 6, 7, 8, 10, 45, 90 and 180D