Pipe cross

A is a kind of pipe fitting. It is used in the place where four pipes meet together. The may have one inlet and three outlets, or there inlets and one outlet.
The diameter of the outlet and inlet can be the same and can also be different. That is to say, straight cross and are both availabe.

Saddle previously

Saddle previously is to replace the existing tee fitting, the use of flexibility, praised by domestic and foreign markets.

Saddle previously DIN2618 …
is the ventilation ducts ‘crotch tee’, its shaped like pants, there Equal and unequal diameter, the formal name is “tube tapered pants tee.”

Reducing cross

We are manufacturer of Reducing cross and supply high quality Reducing cross in both large and small quantities worldwide & offer you the best prices in the market.

Equal cross


Pipe cross are also recommended for industrial plant fluid power systems.

Widely used in various of pipe cross

Pipe cross are widely used in various commercial and industrial applications. Industrial applications include: Chemical processing, Petroleum, Pulp/paper, Refining, Textile, Waste treatment, Marine, Utilities/power generation, Industrial equipment, Automotive, Gas compression and distribution industries.

Pipe cross & Crosses size >>

Pipe cross, LT, Lateral cross , RT, Reducing cross, cross fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.

  • Size range: 1/2 to 20 inches
  • Types: Straight cross, Reducing cross, Y-type
  • Pressure: SCH5 to SCH160
  • Standard: ANSI B16.9/B16.28, MSS SP-43/SP-75

The fitting not only played a role in conection the cossing pipeline but also can control the volume by designed with different dimension of cross ends,sometimes we also adopt rib to reinforce the mechanical property when face hard woeking conditions.

Pattern
Weld
Seamless
Nominal size 1/2”-48” (DN15-DN1200) 1/2”-20” (DN15-DN500)
Wall thickness 2~100mm 2~50mm
Bend radius SCH5S-SCH160 ,XXS SCH5-SCH160
Type cross/reducing cross cross/reducing cross