JIS G3463 Stainless Steel Tube

JIS G3463 is used for exchanging heat on the inside and outside of the tube, it’s applicatino fields are superheater tubes of boilers, heat exchanger tubes, condenser tube and other chemical and petroleum industries,it is not designed for heating furnace tube. According to manufacture method, there’re steel pipe and welded stainless steel (automatic arc , laser or electric resistance ).

JIS G3463 specifies the stainless steel tubes used for exchanging heat on the inside and outside of the tube, it has similar application as JIS G3461 and JIS G3462, while it has better corrosion resistant ability suitable for chemical and petroleum industries. However, it is not applicable to the heating furnace tube. Tube and pipe products of this specification covers more than 10 steel grades from SUS304TB to SUS 316TiTB. The tube shall be manufactured by seamless process, heat-treated, adequately treated to remove the oxid film that may adversely affect inspection. ANSON is an experienced stainless boiler and pressure steel tube supplier which can offer you JIS G3463 steel tube of all grade and dimension range.

JIS G3463 Steel Tube Chemical Composition:
Grade Chemical composition %
C Si Mn P S Ni Cr Mo
SUS 304TB 0.08 max. 1.00 max. 2.00max. 0.040 max. 0.030 max. 8.00~11.00 18.00~20.00
SUS 304HTB 0.04~0.10 0.75 max. 2.00max. 0.040 max. 0.030 max. 8.00~11.00 18.00~20.00
SUS 304LTB 0.030 max. 1.00 max. 2.00max. 0.040 max. 0.030 max. 9.00~13.00 18.00~20.00
SUS 309STB 0.15 max. 1.00 max. 2.00max. 0.040 max. 0.030 max. 12.00~15.00 22.00~24.00
SUS 310TB 0.08 max 1.00 max. 2.00max. 0.040 max. 0.030 max. 12.00~15.00 22.00~24.00
SUS 310STB 0.15 max. 1.50 max. 2.00max. 0.040 max. 0.030 max. 19.00~22.00 24.00~26.00
SUS 316TB 0.08 max. 1.50 max. 2.00max. 0.040 max. 0.030 max. 19.00~22.00 24.00~26.00
SUS 316HTB 0.08 max. 1.00 max. 2.00max. 0.040 max. 0.030 max. 10.00~14.00 16.00~18.00 2.00~3.00
SUS 316LTB 0.04~0.10 0.75 max. 2.00max. 0.040 max. 0.030 max. 11.00~14.00 16.00~18.00 2.00~3.00
SUS 316TiTB 0.030 max. 1.00 max. 2.00max. 0.040 max. 0.030 max. 12.00~16.00 16.00~18.00 2.00~3.00
JIS G3463 Steel Tube Mechanical Property:
Symbol of grade Mechanical properties:
Tensile strength kg f/П
{N/П}
proof stress kg f/П
{N/П}
Elongation %
20 mm min.in outside diameter 10 mm or over to and excl. 20 mm in outside diameter Under 10 mm in outside diameter
No.11 test pieceNo.12 test piece No.11 test piece No.11 test piece
SUS304TB  53{520} min  21{206} min. 35 min. 30 min. 27 min.
SUS304HTB  53{520} min 21{206} min. 35 min. 30 min. 27 min.
SUS304LTB 49{481} min 18{177} min. 35 min. 30 min. 27 min.
SUS309TB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS309STB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS310TB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS310STB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS316TB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS316HTB  53{520} min 21{206} min 35 min. 30 min. 27 min.
SUS316LTB 49{481} min 18{177} min 35 min. 30 min. 27 min.
SUS316TiTB  53{520} min 21{206} min 35 min. 30 min. 27 min.
JIS G3463 Steel Tube Equivalent steel grade:
JIS ASTM/ASME BS DIN
SA-213 17175-X10CrMoVNb91
G3463 SUS304TB SA-213 Tp-304 17456 X2CrNi1911
G3463 SUS304HTB SA-213 Tp 304H 3059 CFS304S51
G3463 SUS316TB SA-213 Tp 316 17456 X5CrNiMo17122
G3463 SUS316HTB SA-213 Tp 316H 3059 CFS316S51
G3463 SUS321TB SA-213 Tp 321 17456 X6CrNiTi1810
G3463 SUS321HTB SA-213 Tp 321H 3059 CFS321S51
G3463 SUS347TB SA-213 Tp 347 17456 X5CrNiNB1810
G3463 SUS347HTB SA-213 Tp 347H 3059 CFS347S51

 

Related products maybe you like
Pipe Material
SA-210-C
SA-210-A1
SA-209-T1B
SA-209-T1A
SA-209-T1

Leave a Reply

Your email address will not be published. Required fields are marked *