ERW pipes

means . and tubes are used.

ERW steel pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc. ERW steel pipes and tube are available in various qualities, wall thicknesses, and diameters of the finished pipes.

Square hollow section


Square steel tube comes in different sizes, specifications and wall thicknesses. Its uniformity makes it predictable to use and visually appealing. It has a high weight-to-strength ratio. It’s easy to bend, and because square steel tubing is inexpensive, it’s cost-effective- even for large projects.


Rectangular Hollow Sections


comes in different sizes, specifications and wall thicknesses. Its uniformity makes it predictable to use and visually appealing. It has a high weight-to-strength ratio. It’s easy to bend, and because square steel tubing is inexpensive, it’s cost-effective- even for large projects.


Oval pipe

Oval pipe
For the best quality Oval Tubes, we serve as one-stop destination in the international market. Our Steel Oval Tubes are endurable and long lasting. They are extensively used in various industrial and engineering applications. Apart from that, we are identified as one of the reliable Oval Steel Tubes Manufacturers and Suppliers in the country.


ASTM A53/A53M Structural Steel Pipe


We are manufacturer of and supply high quality in both large and small quantities worldwide & offer you the best prices in the market.

Welded Tube and Pipe Manufacturing Processes

Steel strip in coil, which has been slit into the required width from wide strip, is shaped by a series of forming rolls into a multiple length shell.

Which difference betweem astm a53 and astm a106

The difference between vs A106 Pipe in spec scope, pipe chemical composition, mechanical properties (tensile & yield strength etc), pipe type.

Electric resistance welding at a glance

This article provides an overview of electric resistance welding (ERW). It dicusses high-frequency ERW (contact and induction) and rotary wheel contact welding (AC, DC, and square wave). It describes the differences among the processes, as well as the power supplies and weld rolls.

EFW pipe vs ERW pipe

Electric Fusion Welding(EFW steel pipe) refers to an electron beam welding, the use of high-speed movement of the electron beam directed impact kinetic energy is converted to heat the workpiece so that the workpiece leaving the melt, the formation of the weld.


Disadvantage and defect of resistance welding

Resistance welding is pressed welders parts between the two electrodes, and go through to the current use of resistance heat generated by current flowing through contact with the workpiece surface and the neighboring regions to be heated to the melting or plastic state, so as to form metal-bindingways.


ERW PIPES

Dimensional tolerance of erw steel pipe

ERW pipes means Electric Resistance Welded Pipes. ERW steel pipes and tubes are used. ERW steel pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc.

ERW pipe technical requirements

ERW steel pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc.


Difference between galvanized pipe and seamless pipe

Galvanized pipe is protected by zinc, so it is not easy to rust, is lighter than seamless steel pipe, if it is used in the balcony, the best light with galvanized pipe


The Purpose Guidance Of Welded Steel Pipe

Generally speaking, the welded steel pipes are divided into general welded pipe, galvanized welded pipe, oxygen welding tube, metric system welded tube, transformer tube, welding thin wall pipe and spiral welded pipe etc.


Special Welded Tubes

Identification of fake spiral steel pipe

We can produce precision and high-frequency welded steel tubes and pipes with all possible dimensions and shapes available.


Our product finds its usage for Agricultural purposes, Drinking Water for housings, in collieries for extraction of Water, Thermal Powers, Transports, Hand pumps for deep boring wells, as a strong protection for cables by Telecom Department, Structural Purposes etc.

While manufacturing ERW steel pipes, only high-quality, continuous-cast, fully killed, control-rolled, fine-grain, low-carbon steel is used. High performance ERW steel pipes and tubing possess high strength corrosion resistance, high deformability, high strength and high toughness. We are among the leading manufacturers and suppliers of erw pipes and tubes in India. We are also one of the largest exporters of erw pipes and tubes in India. ERW pipes and tubes stands for Electric Resistance Welded pipes and tubes.

Based on the customers requirements we can manufacture erw pipes and tubes of different size and shape. We have a very large production capacity of erw pipes and tubes. ERW pipes and tubes are used in various engineering purposes, fencing, scaffolding, line pipes etc. ERW pipe is available in lengths from single random to 120 feet depending on mill capability. ERW pipe is available with square ends or beveled for welding, threaded and coupled and victaulic grooved. Surface finish are available in black or bare, or with protective coatings.

For pipes or tubes size 4 inch (10.2mm) OD and below, strip is fed into a set of forming rolls which consists of horizontal and vertical rollers so placed as to gradually from the flat strip in to a tube which is then allowed to pass the welding electrodes. The electrodes are copper disks connected to the secondary of a revolving transformer assembly.
Size:(ERW, HFI, EFW) and in wall thickness as shown in Table 1. PDF
but we can also produce other specification according to the customers’ requirements.
Outer Diameter: 6mm-610mm (1/16″-24″)
Wall Thickness: 0.3mm-22mm
Length: 0.5mtr-20mtr
ERW line pipe– for the transportation of oil, natural gas and chemical materials
Standards: AP-5L PSL1/ PSL2 GB/T9711.1-1997 GB/T9711.2-1999Steel
Grade :A、B、X42、X46、X52、X56、X60、X65、X70

ERW Casing pipe–petroleum and nature air exploration
Standards: API SPEC 5CT, SY/T5989
Materials :H40 J55 K55

Structure and Mechanical Roundpipe and Tubing
Standards: JIS3466、JIS3445; ASTM A513; GB/T 6728-2002

Steel Materials: Carbon steel, Stainless, and low ally steel
Structure and Mechanical Square or Rectangular Pipe
Standards: GB/T3091 JIS G3452
Steel grade: Q215A、Q215B、Q235AB 、Q295AB、Q345AB

Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.

Related products maybe you like
Weld steel pipes