SSAW pipes

Spiral submerged arc welding(SSAW) is its forward direction and forming tube centerline hose reel molding angle (adjustable), side molding edge welding and weld them into a spiral.

We are manufacturer of SSAW pipes and supply high quality SSAW pipes in both large and small quantities worldwide and offer you the best prices in the market.

SSAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. All the pipes are produced according to API Spec 5L, GB/T9711.1, GB/T9711.2, ASTM A252-89 standard. These pipes mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction.

(O.D×Wall Thickness)mm×Length(mm)
219-3200mm×5-30mm x 12000mm+500mm
In addition to above specification, the pipes can be produced according to customer’s requirements.

Execute Standard:
API SPEC 5L Specification for Line Pipe
GB/T9711.1 Petroleum and natural gas industries—Steel pipe for pipelines—Technical delivery conditions
SY/T5037 Spiral submerged arc welded pipe for low pressure liquid transportation

Q235-Q345, L175-L485, SS400, 16Mn, L290-L360
or according to the customer’s requirements.

Mainly usage:
Spiral welded steel pipes are widely used in Oil, Natural Gas, Water and other flammable & nonflammable liquid conveyance and distribution pipelines, steel structures for construction and other general purposes by means of their wide size range.
Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.
Pipe End:

square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled,

Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE)

Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.

Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield, strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.
Contact usWelcome to order more.

We have a team of experienced professionals with years of experience in manufacturing.