We are manufacturer of Forged Elbow and supply high quality Forged Elbow in both large and small quantities worldwide and offer you the best prices in the market.
Forged Elbow is one of the commom pipe fittings applied in oil&gas industry. An elbow provides a change in material-flow direction. This adds pressure losses to the system due to impact, friction and re-acceleration.As product enters the inlet of the elbow, it typically continues moving straight ahead to the first (or primary) impact zone. The product is then deflected at an angle toward the outlet of the elbow. The deflection angle is determined by the elbow design, the product’s characteristics, the conveying velocity, and specific load (also called the product-to-gas ratio). In many designs, the product will hit one or more secondary impact zones before exiting the elbow.
Forged SR (Short Radius) Elbows
These forged elbows have a Center-to-Face dimension of 1.0 X diameter. They are typically used in tight areas where clearance is the main issue.
Forged LR (Long Radius) Elbows
These forged elbows have a Center-to-Face dimension of 1.5 X diameter. They are the most common type of forged elbow and used when space is available and flow is more critical.
45-Degree and 90-Degree Elbow Fittings with SW& Threaded Connection Ends.
Pressure: 2000LBS, 3000LBS, 6000LBS, 9000LBS
Size: from 1/8″ to 4″
Material: ASTM A105, F304, F316, F304L, F316L, A182 F11/F22/F91
Connection ends: socket weld and threaded
We have a team of experienced professionals with years of experience in manufacturing.
Threaded Pipe Fitting SS304
Threaded Pipe Fitting SS304 with 90 degrees Elbow, Class 150lb, Male and Female Thread.
Size: 1/2 to 4 inchesb
SS304 90 degrees elbow, class 150lb, with male and female thread
Materials: SS304 and SS316
Manufacturing standards: ANSI, JIS, and DIN
Our prefessional foundry can do sand casting,lost wax casting and die casting .
Impact forces can cause severe degradation of fragile or breakage-sensitive products, generating a large amount of fines or dust and creating quality issues. Heat-sensitive products, such as plastic pellets, can overheat on the contact surface this can result in unwanted tails or streamers on the pellet or film build-up on the surface of the elbow, which can eventually lead to product contamination. Abrasive products can cause wear, leading to work-out elbows and system leaks and causing maintenance and safety issues
Elbows can be divided into different degrees,45 degree and 90 degree.There are also different kinds of elbows sold in the market, like tube elbow, pipe elbow, reducing elbow, forged elbow, welded elbow, threded elbow, ect. Today we would like to talk about elbows made by drop forging. Forged 90° elbows are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.
The material as bellowing :
- Gray Iron
- Ductile Iron
- Carbon Steel
- Stainless Steel
- Malleable Iron and Alloy
The products is widely used in automobile , machinery, pipe fittings, pump parts, valve part and other industry.
We are a group company consisting of:
- 4 Sand Casting Plants (mainly produce Cast Iron and Ductile Iron Products)
- 2 Resin Sand Casting Plants (mainly produce Cast Steel&Cast Iron Products)
- 3 Investment Casting Plants (mainly produce Stainless Steel and Carbon Steel products)