Tech service

With the rapid expansion in the global trade, standardization of various products has become an essential requirement. The standards given to various products significantly contributes towards increasing international trade which in turn bridges the quality gap between the manufacturers, producers and buyers of different nations.

The bend is used to change the direction of run of pipe.it advantage is can matach long distance transition requirements,so it is commonly that bends dimension according to customer design. usually,the bends consist of 3D,5D,7D even 12D series.

Bend size


Constants for Pipe Bends:
Formula: L = R x B
L = Length of pipe required
R = Radius of bend
B = Constant from table used to find “L”
How to Bend Pipe
You can bend pipe and tubing in one of several methods, depending on what you plan to use the bent pipe or tube for.

ASTM A420/A420M-07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service.
how to distinguish between pipe elbow and pipe bending
All bends are elbows but all elbows are not bends.


Pipe cap is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line.

End cap size data

Surface treatment:
Transparent oil, rust-proof black oil or hot galvanized.
Special design available All the production process are made according to ISO9001:2000 strictly.

keyword:
Pipe cap,Seamless cap,Steel cap,Carbon Steel Seamless cap,pipe cap,cap end

Common Shapes:
Pipe caps can be in various shapes. Some of the common shapes are hemispherical, oval, square, rectangular, U shape and I shape.


Pipe Tee, LT, Lateral tee , RT, Reducing tee, Tee fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.

Pipe tee size data

Pipe cross are widely used in various commercial and industrial applications. Industrial applications include: Chemical processing, Petroleum, Pulp/paper, Refining, Textile, Waste treatment, Marine, Utilities/power generation, Industrial equipment, Automotive, Gas compression and distribution industries

Pipe cross & Crosses size


A reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter).

Pipe reducer size data

The length of the reduction is usually equal to the average of the larger and smaller pipe diameters.

Carbon Steel Reducers with A234 WPB and 1/2 to 56-inch Size (DN15 to DN1400)Pipe bending

Size: Up to 16” N.B. all schedules


Our high quality stub ends (Butt weld fittings ) are tested and verified for durability, accuracy and precision.

Stub end size data

Size: 1/2″ – 24″
Types: Type A, Type B, Type C, Type D
Material: A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6,316L, 304L, 321, 321H.
Manufacturing standard: ASME/ANSI B16.9, JIS, DIN, EN, API 5L,

--- Hot fittings by Sunny Steel ---

Below are our available pipe fittings that will meet your project needs.We will help you put together your entire project and ship it to your closest port.