Spectacle Flange

A figure-8 blank (also called a Spectacle Blind Flange) is+ a pressure-retaining plate with one solid end and one open end connected with a web or tie bar.

Specifications:
Size: 1/2” to 60”, DN 12mm to DN 1500mm
Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250
Facing: RF / RTJ

A spectacle flange is a specialty flange made of two metal discs attached in the middle by a small section of steel. Spectable flanges get their name because they look like a pair of reading glasses, or spectacles. Spectacle flanges, also known as spectacle blind flanges, are most commonly used on piping systems that need to be separated regularly or where the flow through the systems is regularly stopped. One end of the spectacle flange is solid, while the other end has a hole in the center. The spectacle flange can be rotated to place either the solid or hollow end within the pipe system, thereby opening or closing the flow.

Spectacle Flanges
Keywrods: Spectacle Blind Flanges, Spectacle Blind Flange, Spectacle Flanges, Spectacle Blind Flanges manufactory

Advantages of Spectacle Flanges
Spectacle flanges require no welding for installation
Spectacle flanges from Sunny Steel Flange have a wide range of pressure tolerances
Sunny Steel will manufacture spectacle flanges to your specifications

What is a spectacle blind flange?

A spectacle blind – also known as a figure-8 blind – is generally a piece of metal that is cut to fit between two pipe flanges and usually sandwiched between two gaskets. A spectacle blind is often made from two metal discs that are attached to each other by a small section of steel.

--- Hot flanges by Sunny Steel ---

  • Blind Flanges, BL Flange, BLRF
    The blind flange is used to close ends of piping systems.