Description of DIN EN 10210 and DIN EN 10219

DIN EN 10210-1

Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed…

DIN EN 10210-2

Hot finished structural hollow sections of non-alloy and fine grain steels – Part 2: Tolerances, dimensions and sectional properties
This part of EN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following siz…

HOT FINISHED STRUCTURAL HOLLOW SECTION ACCORDING TO DIN EN 10210  MATERIAL DATA SHEET
Steel designation: Name Material No.
S235JRH 1.0039
S275J0H 1.0149
S355J0H 1.0547
S355J2H 1.0576
CHEMICAL COMPOSITION ( HEAT ANALYSIS IN %)
Steel
grade
Material Type of
deoxidation
C for product
thickness in mm
Si
(max)
Mn
(max)
P
(max)
S
(max)
N
(max)
<=40 40<w.t.<=120
S235JRH 1.0039 FN 0.17 0.20  – 1.40 0.04 0.040 0.009
S275J0H 1.0149 FN 0.20 0.22  – 1.40 0.035 0.035 0.009
S355J0H 1.0547 FN 0.22 0.22 <=0.55 1.60 0.035 0.035 0.009
S355J2H 1.0576 FF 0.22 0.22 <=0.55 1.60 0.03 0.030  –
DIN EN 10219-1

Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hol…

DIN EN 10219-2

Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 2: Tolerances, dimensions and sectional properties
This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size range…

Pipes for pipeline applications
OLD
Execution Norm Steel grade
Welded API 5L Grade B
Welded API 5L Grade X52
Seamless API 5L Grade B
Seamless API 5L Grade X52
NEW
Execution Norm Steel grade
Welded DIN EN 10208-2 L245NB
Welded DIN EN 10208-2 L360NB
Seamless DIN EN 10208-2 L245NB
Seamless DIN EN 10208-2 L360NB

* API standards will remain valid and will not be replaced by Euronorms in the near future

Leave a Reply

Your email address will not be published. Required fields are marked *